PMC PH-40 Hydraulic Proportioner
The PMC PH-40 is a high-output hydraulic proportioner designed for polyurethane spray foam and high-output roofing applications. It combines output up to 40 lb/min with a 2,000 psi maximum working pressure and the serviceable open-frame design of PMC's Classic Series.
PH-40 specifications
- Maximum output: 40 lb/min (18.14 kg/min), measured with mineral oil
- Maximum working pressure: 2,000 psi (138 bar)
- Maximum heated-hose length: 410 ft (121.9 m), depending on transformer configuration
- Available primary-heater capacity: 15,000, 18,000 or 21,000 watts total
- Hose-heating power: 120 volts
- Maximum fluid temperature: 190°F (87.7°C)
- Approximate weight without hydraulic fluid: 555 lb (251.7 kg)
Standard PH/PHX Classic Series features
- Pressure Balance Control system
- Inlet monitoring and proximity reversing systems
- Count-down counter with shutoff control
- Opposed-piston metering pumps
- Digital automatic temperature control
- Individual A- and R-side hybrid heaters
- Automatic ISO lubrication system
- Point-to-point wiring and open-frame service access
Configuration required
The PH-40 is available in multiple voltage, phase, heater and hose-transformer configurations. The spray gun, heated hose, transfer pumps, recirculation equipment and other accessories may be separate unless specifically included in a written package quotation.
Contact SPF Depot at 318-742-8000 before ordering to confirm electrical service, heater size, hose length, chemical system, desired output and package components.
