PMC PH-40 Hydraulic Proportioner

PMC PH-40 Hydraulic Proportioner

The PMC PH-40 is a high-output hydraulic proportioner designed for polyurethane spray foam and high-output roofing applications. It combines output up to 40 lb/min with a 2,000 psi maximum working pressure and the serviceable open-frame design of PMC's Classic Series.

PH-40 specifications

• Maximum output: 40 lb/min (18.14 kg/min), measured with mineral oil
• Maximum working pressure: 2,000 psi (138 bar)
• Maximum heated-hose length: 410 ft (121.9 m), depending on transformer configuration
• Available primary-heater capacity: 15,000, 18,000 or 21,000 watts total
• Hose-heating power: 120 volts
• Maximum fluid temperature: 190°F (87.7°C)
• Approximate weight without hydraulic fluid: 555 lb (251.7 kg)

Standard PH/PHX Classic Series features

• Pressure Balance Control system
• Inlet monitoring and proximity reversing systems
• Count-down counter with shutoff control
• Opposed-piston metering pumps
• Digital automatic temperature control
• Individual A- and R-side hybrid heaters
• Automatic ISO lubrication system
• Point-to-point wiring and open-frame service access

Configuration required

The PH-40 is available in multiple voltage, phase, heater and hose-transformer configurations. The spray gun, heated hose, transfer pumps, recirculation equipment and other accessories may be separate unless specifically included in a written package quotation.

Contact SPF Depot at 318-742-8000 before ordering to confirm electrical service, heater size, hose length, chemical system, desired output and package components.