PMC PH-2 Hydraulic Spray Foam Proportioner
The PMC PH-2 is a hydraulic proportioner designed for residential and commercial polyurethane spray foam insulation. It combines output up to 28 lb/min with a 2,000 psi maximum working pressure and horizontal opposed-piston metering pumps in an accessible open-frame design.
PH-2 specifications
- Maximum output: 28 lb/min (12.70 kg/min), measured with mineral oil
- Maximum working pressure: 2,000 psi (138 bar)
- Maximum hose length: 210 ft with 70V transformer, 310 ft with 90V transformer or 410 ft with 120V transformer
- Available primary-heater capacity: 7,500, 9,000, 10,500 or 14,000 watts total, depending on configuration
- Maximum fluid temperature: 190°F (87.7°C)
- Dimensions: approximately 44 in wide x 22 in deep x 54 in high
- Approximate weight without material: 415 lb (188 kg)
Key features
- Hydraulic drive with horizontal metering pumps
- Pressure Balance Control system
- Inlet monitoring and count-down shutoff
- Automatic ISO lubrication system
- Digital material and hose temperature control
- Point-to-point wiring and open-frame service access
Configuration required
The PH-2 is offered in multiple voltage, phase, primary-heater and hose-transformer configurations. The spray gun, heated hose, transfer pumps and other accessories may be separate unless specifically included in a written package quotation.
Contact SPF Depot at 318-742-8000 before ordering to confirm available electrical service, heater size, hose length, chemical system and package components.
