Home > Shop by Manufacturer > PMC-POLYMAC PRODUCTS > Proportioners

PMC Proportioners

PMC-Polymac has a long history of manufacturing affordable and dependable equipment for the spray foam industry, and the proportioners available at SPF Depot are no different. Browse our large selection of air driven and hydraulic proportioners, ideal for small residential or demanding commercial jobs. A PMC proportioner or spray foam reactor is a vital piece of spray foam insulation equipment that maintains the proper temperature of the chemicals and pumps them through the hose to the applicator. The spray foam insulation machine, like the proportioners found here, produce consistent results time after time. Check out each spray foam reactor page for technical specifications. The PMC Proportioner rigs can also be used in a range of spray on coating applications like roofing, spray-on truck bed liners and more.

Sort By:
Page of 1
3/8 "Outlet Check Valve for PMC Proportioners 3/8 "Outlet Check Valve for PMC Proportioners

Retail Price: $3.44
Sale Price: $3.44
1/2" Inlet Check Valve for PMC Proportioners 1/2" Inlet Check Valve for PMC Proportioners

Retail Price: $4.21
Sale Price: $4.21
PU-05020 Inlet Ball PU-05020 Inlet Ball

For PMC PH40 Proportioners

Retail Price: $7.71
Sale Price: $7.35
You Save $0.36!
OR-00046A Pump Ring on PH40 Proportioner OR-00046A Pump Ring on PH40 Proportioner

For PMC PH40 Proportioners

Retail Price: $7.80
Sale Price: $7.41
You Save $0.39!
In-Rush Current Limiter In-Rush Current Limiter

Retail Price: $27.96
Sale Price: $26.56
You Save $1.40!
PU-05019 Inlet Seal PU-05019 Inlet Seal

For PMC PH40 Proportioners

Retail Price: $131.02
Sale Price: $124.47
You Save $6.55!
Main Power Switch Main Power Switch

Complete Kit Includes EL-103, EL-104 and EL-105

Retail Price: $190.00
Sale Price: $155.00
You Save $35.00!
Temperature Control Module for PMC PH Series Temperature Control Module for PMC PH Series

Retail Price: $179.84
Sale Price: $170.85
You Save $8.99!
PMC ISO & POLY Single Hoses PMC ISO & POLY Single Hoses

Replacement Heated Hose for Graco, Gusmer, PMC and others. PMC hose is a true braided heater wire, fully encapsulated in a sturdy rubber coating to prevent moisture from contacting the heater wires. PMC hose heater wires have a superior heating rate compared to other OEM products. Available in low and high pressure, 1/4, 3/8 and 1/2"

Pressure Balance Control Unit For PH 25/40 Series Proportioners Pressure Balance Control Unit

For PH 25/40 Series Only

Retail Price: $1,108.48
Sale Price: $1,055.00
You Save $53.48!
PH25 Spray Gun Proportioner 2000psi, lbs/Minute PMC Polymac-USA PH2; Proportioner. 2000psi, 30lbs/Minute


Users of plural-component spray foam proportioners are finding a new favorite in the top-quality PMC PH2 Series hydraulic proportioner line offered here at spfdepot.com.
28lbs/Min , 2000psi and up to 210' of heated hose, 7.5,9 1nd 10.5 KW Heaters available

Retail Price: $16,785.00
Sale Price: $15,945.75
You Save $839.25!
PH25 Spray Gun Proportioner 2000psi, 30lbs/Minute PMC Polymac-USA PH25; Proportioner. 2000psi, 30lbs/Minute

PMC PH25 Spray Gun Proportioner 2000psi, 30lbs/min

Users of plural-component spray foam proportioners are finding a new favorite in the top-quality PMC PH25 Series hydraulic proportioner line offered here at spfdepot.com. You can have your PH25 proportioner 2000psi, 20lbs/minute-capacity unit easily adjusted up to 3500psi, which produces 30lbs/minute, with the simple change of a setting. Your hoses can also extend out to 310'. This PMC PH25 foam and coating proportioner is as at home on a tight residential job as when working on a large commercial rooftop insulation project. It is, in fact, the ideal dual-purpose commercial and residential proportioner, which speaks to why it has become so popular in the field. And check out the special sale price!

The electrical panel has been beefed up to make it more rugged, and controls are now NEMA 4 rated. Advanced controls and monitoring functions make it easy to use and reliable on the job. All components are easily interchanged, and parts are readily available.

Retail Price: $20,900.00
Sale Price: $17,500.00
You Save $3,400.00!
pmc phx 25 residential foam proportioner PHX-25 Residential Foam Proportioner

PMC PHX-25 Classic Residential Hydraulic Foam Proportioner

The PHX-25 Residential Foam Proportioner is a slightly scaled-down version of the PMX-40, sharing the same technological advancements, but having somewhat less capacity. The max output for this residential spray foam proportioner is 1.9 gpm, as opposed to the 2.8 gpm the PMX-40 puts out. Max pressure is 3000 psi, compared to 3500 psi, and the maximum hose length is reduced from 410' to 310'. Selecting your particular hydraulic proportioner for foam and coatings applications will depend on the size of the jobs you're usually undertaking and, of course, the amount of money you're willing to invest in a PMC Plural Component Proportioner.

This PMC Classic PHX-25 proportioner will satisfy most contractors' requirements and, when compared to the PMX-40 version, sell for considerably less. Normally selling at $4,600 less than the more powerful machine, a current special discount allows you to purchase the unit at an additional $1,000 price drop.  

Retail Price: $23,050.00
Sale Price: $20,900.00
You Save $2,150.00!
PH40 Proportioner. 2000psi, 40lbs/Minute Polymac for Spray Application PH40 Proportioner. 2000psi, 40lbs/Minute

PMC PH40 Plural Component Spray Foam Proportioner

You may have noticed that the PMC PH40 Series of hydraulic proportioner units is available with either 7.5 kw or 9.0 kw of operating power for the material heater. You'll see the same headline at the top of both product pages – PH40 proportioner. 2000psi, 40lbs/minute – and as you go through the specifications, you should realize that they're essentially the same, only differing as to the amount of power applied in heating the materials to be sprayed.

The capabilities of this PH40 foam and coating proportioner with 7.5 kw heater are nearly identical to the 9 kw unit, with the exception of having an electrical consumption of 80 A @ 3x230 volts, compared to 93 A @ 3x230 volts (using both heaters) of the 9.0 kw model. Open architecture in frame design makes this commercial and residential proportioner easy to maintain and operate. As medium-sized plural- component spray foam proportioners go, this is as good as they get!

Supports up to 310' Heated Hose

PH40;120;7.5kw, 5HP, 1ph

Retail Price: $26,500.00
Sale Price: $25,108.50
You Save $1,391.50!
pmc phx 40 hydraulic proportioner PHX40 Proportioner. 3000psi, 2.5gpm

PMC PHX-40 Classic Hydraulic Proportioner - 3000psi, 2.5gpm

In an effort to provide the best, most efficient equipment used in the foam and coatings spray industry, we're now offering the PMX-40 Proportioner 3000psi 2.5gpm at a significantly discounted price. This PMC Classic Hydraulic Proportioner is manufactured by industry-leading Polyurethane Machinery Corporation and designed for high-output spraying of plural component coating applications.

The PHX Series Proportioner lineup contains six different units, with this particular high-output proportioner the "big daddy" of the group. It's ideal for large jobs such as roofing, commercial insulation and applying coatings to secondary containment tanks. This PMC PHX-40 Proportioner for foam and coatings has recently been redesigned to feature more rugged electronics and to be easier to use and maintain. It includes a pressure balance control system and a selectable countdown shutoff to interrupt the pump prior to the drum set going empty. This unit is CE certified, features an ISO lubrication system and will support up to 410' of heated hose. 

Retail Price: $27,150.00
Sale Price: $25,500.00
You Save $1,650.00!