PMC PHX-2 Hydraulic Proportioner - Part 106534
This PMC PHX-2 is configured with a 5 hp hydraulic drive, 220-volt three-phase power, a 90-volt hose transformer and 14 kW of primary heat. The PHX-2 is designed for polyurea and other fast-curing plural-component coatings requiring higher spray pressure.
Configuration
- PMC part number: 106534
- Hydraulic motor: 5 hp
- Main power: 220V, three phase
- Primary heater: 14,000 watts total
- Hose transformer: 90 volts
PHX-2 performance
- Published output: up to 1.7 gal/min (6.43 L/min), depending on installed pumps and material
- Maximum working pressure: 3,000 psi (approximately 207 bar)
- Maximum heated-hose length with 90V transformer: 310 ft (94.5 m)
- Maximum fluid temperature: 190°F (87.7°C)
- Dimensions: approximately 44 in wide x 22 in deep x 54 in high
- Approximate machine weight: 415 lb (188 kg)
Key features
- Pressure Balance Control system
- Inlet monitoring and count-down shutoff
- Horizontal opposed-piston metering pumps
- Hydraulic drive with open-frame service access
- Automatic ISO lubrication system
The spray gun, heated hose, transfer pumps and other accessories may be separate unless specifically included in a written quotation. Contact SPF Depot at 318-742-8000 to confirm material compatibility and package contents before ordering.
