IPM 820301 OP232C Stainless Steel Drum Pump

IPM 820301 OP232C Stainless Steel Drum PumpIPM Transfer Stick Pumps to Replace Graco T1 and T2 Series Transfer Pumps

• Superior Durability: Features all-stainless steel wetted parts to resist the corrosive effects of aggressive isocyanates and fire-retardant resins that degrade standard pumps.
• Corrosion Resistance: Features all-stainless steel wetted parts, specifically machined to withstand the aggressive chemical nature of "A-side" isocyanates and corrosive resins.
• Uniform Material Flow: The 2:1 ratio and 2-ball piston design provide steady positive displacement, delivering up to 5.0 GPM to keep your proportioner pressurized during high-speed applications.
• Moisture Protection: Includes a "divorced" fluid section design that physically separates the air motor from the material, preventing ISO crystallization on the piston rod from shredding your seals.
• Advanced Seal Protection: The "divorced" design positions seals so they never contact the pumped material, preventing the ISO crystallization that causes premature shaft failure.
• High-Volume Output: Capable of delivering up to 5.0 GPM continuously, keeping up with the most demanding high-output residential and commercial spray applications.
• Easy Drum Integration: Features a quick-release bung bushing designed for standard 55-gallon drums, allowing for fast, clean drum changes without interrupting your production flow.

The IPM-OP232C Stainless Steel Drum Pump from SPF Depot is the industry-standard choice for feeding high-viscosity materials through your spray foam equipment. When troubleshooting an uneven spray pattern at your Fusion AP gun, this transfer pump is the first place we check for pressure consistency. Unlike standard spray foam pump parts that may struggle with thick fluids, the OP232C handles heavy resins without the cavitation issues that lead to off-ratio foam. While many rigs carry a Graco pump repair kit for emergencies, professionals often upgrade to this stainless model for its superior durability in foam insulation equipment. By ensuring a clean, surge-free supply of spray foam supplies to your Reactor E-30, you prevent the micro-clogs in mix chambers and side seals that halt production.

• Commercial Roofing: Engineered to transfer the high-output roof coatings and abrasive polyureas used in large-scale industrial projects.
• In-Plant Manufacturing: Trusted in controlled factory environments for the high-precision dispensing of adhesives and polyurethane coatings.
• Mobile Spray Rigs: The go-to solution for residential contractors who need a reliable fit for 55-gallon drums that resists the moisture contamination common in field work.

Fluid Ratio :2:1Max Output Flow Int :7.5 gpm(28.4 lpm)Max Output Flow Cont :5.0 gpm(18.9 Ipm)Max Output Pressure :360 psi (24.8 bar)Max Air Input Pressure :180 psi (12.4 bar)Air Inlet Port :1/4 npt(f)Fluid Outlet Port :3/4 npt(f)Rod Piston Packings :UHMU PE or TelfonOther Seals :VitonRod Cylinder :Stainless SteelOther Wetted Parts :Stainless SteelWeight :24 Ibs.(11.8 Kg.)Weight Stubby Drum :NAPackage :OP232C...6"x6"x58"(152mmx152mmx147cm) 26 Ibs.(11.8 Kg.)Model Number :820301(Stainless Steel)

CLICK HERE FOR: IPM OP-232 Pump Manual