PMC PHX-25 Hydraulic Proportioner

PMC PHX-25 Hydraulic Proportioner

The PMC PHX-25 is a mid- to high-output hydraulic proportioner designed for polyurea and other fast-curing plural-component coatings. It provides output up to 1.9 gal/min with a 3,000 psi maximum working pressure and uses PMC's serviceable Classic Series platform.

PHX-25 specifications

• Maximum output: 1.9 gal/min (7.19 L/min), measured with mineral oil
• Maximum working pressure: 3,000 psi (approximately 207 bar)
• Maximum heated-hose length: 310 ft (94.5 m) with the standard 90-volt transformer; other configurations may vary
• Available primary-heater capacity: 8,000, 10,000 or 12,000 watts total
• Maximum fluid temperature: 190°F (87.7°C)
• Dimensions: approximately 40 in wide x 26 in deep x 52 in high
• Approximate weight: 500 lb (228.6 kg)

Classic Series features

• Pressure Balance Control system
• Count-down control with pump-circuit shutoff
• Opposed-piston metering pumps
• Digital automatic temperature control
• Independent ISO and resin heaters
• Automatic ISO lubrication system
• Point-to-point wiring and open-frame service access

Configuration required

The PHX-25 is available in multiple voltage, phase, heater and hose-transformer configurations. The spray gun, heated hose, transfer pumps, recirculation equipment and other accessories may be separate unless specifically included in a written package quotation.

Contact SPF Depot at 318-742-8000 before ordering to confirm electrical service, heater size, hose length, coating system, desired output and package components.