Home > Search for "pmc"
We found 259 results matching your criteria.
Sort By:
Page of 13
pmc rtd replacement temperature sensing unit PMC RTD Assembly. Replacement to Graco 24K207

PMC RTD Assembly Replacement Temperature Sensing Unit

While many may give the thumbs up to the Graco brand for some of the best spray parts available, when it comes to replacing your four wire RTD (resistance temperature detector), you might consider going to an aftermarket solution such as the PMC RTD temperature sensing unit. As good or better quality as the OEM unit, this RTD replacement to Graco 24K207 is currently marked down an additional 25+ percent from our everyday discounted price.

Your Graco Reactor 2 Series temperature sensing unit will eventually require replacement. Whether you're shooting with a Graco E20i, E30i or Xpi, this PMC RTD will replace your Reactor 2 Series RTD assembly. It can be ordered as a stand-alone, single part or as part of a 50' hose assembly. For the very best value in spray foam resistance temperature detectors, you can count on the experts at SPF Depot to deliver.

For Reactor 2 Series, 4 Conductor RTD. Equal to Graco # 24K207. Fits your E20i, E30i, XPi... Reactors.

Retail Price: $808.39
PMC AP2 Gun Block - STEEL PMC AP2 Gun Block - STEEL

For PMC AP2 Guns. Steel construction to hold up better than the aluminum part.

Retail Price: $481.81

(1)
PHX-25 Residential Foam Proportioner PHX-25 Residential Foam Proportioner

PMC PHX-25 Classic Residential Hydraulic Foam Proportioner

The PHX-25 Residential Foam Proportioner is a slightly scaled-down version of the PMX-40, sharing the same technological advancements, but having somewhat less capacity. The max output for this residential spray foam

proportioner is 1.9 gpm, as opposed to the 2.8 gpm the PMX-40 puts out. Max pressure is 3000 psi, compared to 3500 psi, and the maximum hose length is reduced from 410' to 310'. Selecting your particular hydraulic proportioner for foam
and coatings applications will depend on the size of the jobs you're usually undertaking and, of course, the amount of money you're willing to invest in a PMC Plural Component Proportioner.

This PMC Classic PHX-25 proportioner will satisfy most contractors' requirements and, when compared to the PMX-40 version, sell for considerably less. Normally selling at $4,600 less than the more powerful machine, a current

special discount allows you to purchase the unit at an additional $1,000 price drop.  

Retail Price: $35,830.00
PMC Proportione Check Valve O-Ring PMC Proportione Check Valve O-Ring

For PMC Proportioners

Retail Price: $6.36
PMC Chamber w/Drills For PMC AP2 Spray Guns PMC Chamber w/Drills

For PMC AP2 Guns

Retail Price: $141.47

(3)
PMC GU-841 Cylinder Riser PMC AP2 Cylinder Riser

GU-841 Riser 229.00 PMC AP2 Guns

Retail Price: $229.00
PMC-KT-814 Chamber/PCT Kit PMC-KT-814 Chamber/PCT Kit

For PMC AP2 Guns

Retail Price: $298.18

(2)
PMC 203290 Xtreme Gun Block PMC AP3 Gun Block

PMC 203290 Xtreme Gun Block

Retail Price: $304.85
Coupling Block Body Assembly PMC AP Coupling Block Body Assembly PMC AP

PMC AP2, AP3 Guns GU-04001 Manifold

Retail Price: $648.31
4-40 Elastic Stop Nut 4-40 Elastic Stop Nut

4-40 Elastic Stop/Lock Nut For PMC AP2 Guns

Elastic lock nuts (also called self-locking nuts) tightly lock into place due to the nylon lining. Our 4-40 elastic lock nut is made with steel and nylon and will resist vibrations and torque when you use your PMC AP2 gun.

Retail Price: $3.26
Heated Hose. 2000psi, 3/8 x 50' "A" SIDE HOSE ONLY Heated Hose. 2000psi, 3/8 x 50' "A" SIDE HOSE ONLY

Heated Hose 3500psi 3/8 x 50' Thermocouple Wire

Maintain the correct temperature of plural spray foam components with PMC-USA/Polymac spray foam heated hose. Ideal for high-pressure and large jobs, this 3500 psi x 50 heated SPF hose is a top seller with our spray foam insulation, roofing and spray-on truck liner customers. A quality high- pressure heated hose not only feeds the spray gun but also results in better foam and polyurea application. This heated hose with thermocouple wire is compatible with PMC-USA/Polymac spray guns.

Retail Price: $1,276.00

(1)
PMC Heated Hose Whip HEATED Hose Whip. 3500psi, 1/4 x 10'

PMC Heated Hose Whip

High pressure heated hose for use with guns spraying foam and various other coatings isn't cheap to buy, and anything that will increase the life of these often-abused pieces of hardware can save you hundreds or thousands of dollars. This 10' X 1/4 " spray foam heated hose from PMC has been upgraded by SPF Depot with the addition of an encapsulating rubber jacket as a means of damage protection and moisture resistance. This takes an already extremely durable whip hose and, for an extra 20 bucks, makes it several times better able to hold up to the type of wear & tear these parts typically suffer.

This 3500 psi heated SPF hose has everything the underlying product has quick, even heating from the braided copper wrap and tough PVC jacket. This heated hose with thermocouple wire works with Graco, GlasCraft, PMC and Gusmer guns. For the Xtreme-Guard JACKET ONLY - See part# 24T244. Sold in 10' and 50' rolls. Saves you thousands due to the longer life of the hose.


Retail Price: $979.00
PMC PH25 Series hydraulic proportioner PH25; Proportioner. 2000psi, 30lbs/Minute

PMC PH25 Spray Gun Proportioner 2000psi, 30lbs/min

Users of plural-component spray foam proportioners are finding a new favorite in the top-quality

PMC PH25 Series hydraulic proportioner line offered here at spfdepot.com. You can have your PH25 proportioner
2000psi, 20lbs/minute-capacity unit easily adjusted up to 3500psi, which produces 30lbs/minute, with the
simple change of a setting. Your hoses can also extend out to 310'. This PMC PH25 foam and coating
proportioner is as at home on a tight residential job as when working on a large commercial rooftop
insulation project. It is, in fact, the ideal dual-purpose commercial and residential proportioner, which
speaks to why it has become so popular in the field. And check out the special sale price!

The electrical panel has been beefed up to make it more rugged, and controls are now NEMA 4 rated.

Advanced controls and monitoring functions make it easy to use and reliable on the job. All components are
easily interchanged, and parts are readily available.

Retail Price: $32,105.00
PHX40 Proportioner 3000psi PHX40 Proportioner. 3000psi, 2.5gpm

PMC PHX-40 Classic Hydraulic Proportioner - 3000psi, 2.5gpm

In an effort to provide the best, most efficient equipment used in the foam and coatings spray industry, we're now offering the PMX-40 Proportioner 3000psi 2.5gpm at a significantly discounted price. This PMC Classic

Hydraulic Proportioner is manufactured by industry-leading Polyurethane Machinery Corporation and designed for high-output spraying of plural component coating applications.

The PHX Series Proportioner lineup contains six different units, with this particular high-output proportioner the "big daddy" of the group. It's ideal for large jobs such as roofing, commercial insulation and applying

coatings to secondary containment tanks. This PMC PHX-40 Proportioner for foam and coatings has recently been redesigned to feature more rugged electronics and to be easier to use and maintain. It includes a pressure balance control
system and a selectable countdown shutoff to interrupt the pump prior to the drum set going empty. This unit is CE certified, features an ISO lubrication system and will support up to 410' of heated hose. 

Retail Price: $44,160.00
PMC Side Seals - PMC Side Seal- AP2 Delrin

Sold As SINGLES

Retail Price: $30.92
PMC Side Seal - AP2 Steel PMC Side Seal - AP2 Steel

SPF Depot 202247-T Titanium Side Seals - 59.50/SET

Retail Price: $68.33
PMC 32 Amp Breaker 32 Amp Breaker - PMC PH25

Retail Price: $103.26
PMC Chamber w/Drills For PMC AP2 Spray Guns PMC 2:1 Ratio Chamber w/Drills

2:1 Ratio

Retail Price: $146.00
PMC AP3 Cylinder Body PMC AP3 Cylinder Body


Retail Price: $248.13