PMC PHX-25 Classic Residential Hydraulic Foam Proportioner The PHX-25 Residential Foam Proportioner is a slightly scaled-down version of the PMX-40, sharing the same technological advancements, but having somewhat less capacity. The max output for this residential spray foam proportioner is 1.9 gpm, as opposed to the 2.8 gpm the PMX-40 puts out. Max pressure is 3000 psi, compared to 3500 psi, and the maximum hose length is reduced from 410' to 310'. Selecting your particular hydraulic proportioner for foam and coatings applications will depend on the size of the jobs you're usually undertaking and, of course, the amount of money you're willing to invest in a PMC Plural Component Proportioner. This PMC Classic PHX-25 proportioner will satisfy most contractors' requirements and, when compared to the PMX-40 version, sell for considerably less. Normally selling at $4,600 less than the more powerful machine, a current special discount allows you to purchase the unit at an additional $1,000 price drop.
Maximum working pressure (with 120 pumps): ____________ ________ 2,000 psi, 138 Bar
Maximum working pressure (with 80 pumps): _____________________ 3,000 psi, 207 Bar
Maximum production ratio 1:1 (with 120 pumps): ________________ 25 lb/min, 12.5kg/min
Maximum production ratio 1:1 (with 80 pumps): ____________________ 1.4 gpm, 5.6 lpm
Minimum production: _________________________________________ 2 lb/min, 1kg/min
Maximum hose length: ___________________________________________ 310 ft, 93 m
Approximate weight (Hydraulic Tank empty): ________________________ 420 lbs, 210 kg
Approximate weight (Hydraulic Tank full @ 20 gal, 8 liters): _____________ 594 lbs,297 kg
Dimensions: _________________ 30in W x 26in D x 45in H, 76cm W x 66cm D x 114cm H
|
