SPF GOLD Series Trigger/Pin Set. Real Gold Coating and still less than the factory price!
100% Interchange with OEM Parts
Select Chamber Size at Checkout.
Weighing in at a mere 2.1 pounds, less than any other air purge gun on
the market, Polyurethane Machinery Corporation's AP-2 Spray Foam Gun may also be the easiest to use. With a
minimum trigger stroke distance, it immediately develops a spray pattern, thereby reducing operator fatigue. The
PMC AP-2 Gun has a special check valve that prevents chemicals from entering the gun's air passages, and multi-
directional airflow passages keep tips clean, reducing maintenance and down time.
This PMC Spray Gun is
the lightest, most compact and least expensive American-made AP gun sold in the marketplace. The handle can be
removed for installation of a custom handle or for connection to robotic equipment. The gun body has a special
coating designed to resist buildup of foam or other coatings. Users have commented on how much less maintenance
is required for this unit compared to other units.
The Graco GAP Pro spray gun is well regarded in the industry and one of the best, but at the price
many suppliers are charging for them, you could practically buy two of ours! This direct replacement for the
GAP Pro Air-Purge Gun model, engineered and manufactured in Germany, is every bit as good, and yet we're
offering it at a huge discount compared to the comparable GAP Pro Spray Foam Gun. We also offer OEM spray gun
replacement parts for not only this particular model, but also for the Graco model. And we carry our own
brand of aftermarket parts for both guns that sell for a fraction of what you'd pay for their OEM
Our SPF Depot-branded parts are direct replacements for Graco spray foam parts but are cheaper to
buy even though the quality level is just as high or higher. SPF Depot is the sole source for this GAP Pro
replacement unit across North America.
The Graco Probler P2 Gun, considered by many to be on the edge of plural-component air-purge gun
technology, is currently being offered at a near 25% discount from the manufacturer's suggested retail price.
The patented Graco Probler P2 provides lots of benefits, including:
The GlasCraft Probler P2 Gun provides coating and foam applications for roof coating, wall and roof
insulation, tank and pipe coating, truck bed liners, waterproofing and secondary containment spill
prevention. The Graco foam and polyurea spray gun is used in both residential and commercial painting and
texture application, bridge maintenance and the application of spray foam insulation. The P2 spray foam gun
works with adhesives, polyurethane, polyurea and various roof coatings. These are new OEM units being sold at
a deep discount, backed by a comprehensive inventory of replacement/maintenance parts, both OEM and SPF
The Graco Fusion AP (air purge) Plural Component Spray Gun is the ideal
piece for conducting high-output spray polyurethane and other polyurea coating operations for many applications,
and it’s in stock now right here at SPF Depot. The Graco Fusion AP Gun is made with a long-life mixing chamber
and tough, long-lasting seals for lower maintenance requirements and less downtime. This fusion air purge gun
experiences less clogging and buildup in the tip due to its air blast tip cleaning capability. You can also
easily change mixing chambers without the use of tools because the front cap needs only to be hand
You'll notice that our cost for the Fusion AP is at a nice discount from the manufacturer's
suggested retail price. In addition, you'll find a comprehensive selection of replacement parts for this piece
of equipment, including both genuine Graco parts, also offered at markdown prices, as well as SPF-made
replacement parts typically available at huge discounts when compared to their OEM counterparts.
Genuine Graco Parts