Home > Shop by Manufacturer > PMC-POLYMAC PRODUCTS > Hoses

PMC Spray Foam Heated Hose

To properly apply spray foam and polyurea coatings to any surface, a heated hose is needed to transport the chemicals to the job site and maintain the required application temperature. Our selection of high-pressure heated hoses and whip hoses all feature a braided design to stand up to the wear and tear of everyday use and are compatible with PMC-USA/Polymac guns. The copper weave element of the heated hose with thermocouple wire provides full hose coverage to maintain the chemical’s heat in route to the gun while still allowing the heated hose to bend. Shop for a spray foam heated hose from PMC-Polymac brands today.

Sort By:
Page of 1
PMC SS Whip Hose Set

Fits Hoses by Graco, PMC, GlasCraft and others

Our Price: $198.00
Sale Price: $188.60
You Save $9.40!

(2)
Flex Thermocouple ONLY for TSU Unit Flex Thermocouple ONLY for TSU Unit

PMC Flex Thermocouple replacement for EL-51A Temperature Sensing Unit

Our Price: $336.84
Sale Price: $320.00
You Save $16.84!
Drum Breather/Filter Assembly

Our Price: $357.00
Sale Price: $339.00
You Save $18.00!
HEATED 1/4 x 10' "A" Side Whip Hose; 3500psi

Our Price: $451.00
Sale Price: $428.45
You Save $22.55!
pmc rtd replacement temperature sensing unit PMC RTD Assembly. Replacement to Graco 24K207

PMC RTD Assembly Replacement Temperature Sensing Unit

While many may give the thumbs up to the Graco brand for some of the best spray parts available, when it comes to replacing your four wire RTD (resistance temperature detector), you might consider going to an aftermarket solution such as the PMC RTD temperature sensing unit. As good or better quality as the OEM unit, this RTD replacement to Graco 24K207 is currently marked down an additional 25+ percent from our everyday discounted price.

Your Graco Reactor 2 Series temperature sensing unit will eventually require replacement. Whether you're shooting with a Graco E20i, E30i or Xpi, this PMC RTD will replace your Reactor 2 Series RTD assembly. It can be ordered as a stand-alone, single part or as part of a 50' hose assembly. For the very best value in spray foam resistance temperature detectors, you can count on the experts at SPF Depot to deliver.

For Reactor 2 Series, 4 Conductor RTD. Equal to Graco # 24K207. Fits your E20i, E30i, XPi... Reactors.

List Price: $486.72
Our Price: $486.72
Sale Price: $462.38
You Save $24.34!
PMC AP2 Heated Whip Hose 3500 PSI HEATED 1/4 x 10' Whip Hose; 3500psi

Heated Whip Hose for PMC AP2 Spray Gun

Polyurethane Machinery Corp. (PMC) makes a 10' spray foam heated hose for PMC AP-2 guns that also works with various other spray foam (and other coatings) guns, including Graco and Gusmer. This 1/4 ", 3500 psi heated SPF hose, product # MA-00040A, is made extra tough, featuring a braided copper wire wrapping for heating, surrounded by a protective jacket made from extruded PVC. This heated hose with thermocouple wire is about as good as it gets, and we're offering it at a great discount price.

This whip hose heats up your foam or other coating material more quickly and evenly than the others. Ruggedness and reliability are important factors in heated whip hoses since, by the very nature of their work, they experience significant wear and tear. You can, however, expect this PMC hose to serve you for a long time and to produce excellent results while doing so.

Our Price: $564.00
Sale Price: $536.00
You Save $28.00!
PMC Heated Hose Whip HEATED Hose Whip. 3500psi, 1/4 x 10' w/Xtreme-Guard™ Scuff Jacket

PMC Heated Hose Whip

High pressure heated hose for use with guns spraying foam and various other coatings isn't cheap to buy, and anything that will increase the life of these often-abused pieces of hardware can save you hundreds or thousands of dollars. This 10' X 1/4 " spray foam heated hose from PMC has been upgraded by SPF Depot with the addition of an encapsulating rubber jacket as a means of damage protection and moisture resistance. This takes an already extremely durable whip hose and, for an extra 20 bucks, makes it several times better able to hold up to the type of wear & tear these parts typically suffer.

This 3500 psi heated SPF hose has everything the underlying product has – quick, even heating from the braided copper wrap and tough PVC jacket. This heated hose with thermocouple wire works with Graco, GlasCraft, PMC and Gusmer guns. For the Xtreme-Guard™ JACKET ONLY - See part# 24T244. Sold in 10' and 50' rolls. Saves you thousands due to the longer life of the hose.



Scuff Jacket # HP-24T244

Our Price: $650.00
Sale Price: $579.00
You Save $71.00!
3/8 x 50' 2000psi Heated Hose Set for spray foam and polyurea applications Heated Hose. 2000psi, 3/8 x 50' "B" SIDE HOSE ONLY

NOT for use in H and XP Series.

Our Price: $662.00
Sale Price: $628.90
You Save $33.10!
3/8 x 50' 2000psi Heated Hose Set for spray foam and polyurea applications Heated Hose. 2000psi, 3/8 x 50' "A" SIDE HOSE ONLY

NOT for use in H and XP Series.

Our Price: $662.00
Sale Price: $628.90
You Save $33.10!

(1)
PMC polymac heated hose for graco reactors,glascraft,gusmer proportioners pumps Heated Hose. 3500psi, 3/8 x 50' "B" SIDE HOSE ONLY

"B" Side Replacement Hose. Will fit other OEM brands. Call for exact length required.

Our Price: $742.00
Sale Price: $704.90
You Save $37.10!
Heated Hose. 3500psi, 3/8 x 50' "A" SIDE HOSE ONLY

"A" Side Replacement Hose. Will fit other OEM brands. Call for exact length required.

Our Price: $742.00
Sale Price: $704.90
You Save $37.10!
3/8 x 50' 2000psi Heated Hose Set for spray foam and polyurea applications Heated Hose, 3/8 x 50' Hose; 2000psi - NO Thermocouple Wire

Thermocouple Wire and Scuff NOT INCLUDED

Our Price: $1,250.00
Sale Price: $1,187.50
You Save $62.50!
PMC 2000 PSI Heated Hose Set for Spray Foam & Polyurea Applications 3/8" x 50' Heated Hose. 2000psi, 3/8" x 50' with Thermocouple Wire.

PMC 2000 PSI Heated Hose Set

For a low pressure heated hose to run your foam spray gun, take a look at this 50' X 3/8", 2000 psi heated SPF hose. This spray foam heated hose is as tough as they come compared to anything else out there, plus we offer an upgrade by way of a rubber jacket to help scuff- and moisture-proof your hose.

This heated hose with thermocouple wire employs the use of a braided copper wire wrap for heating. The wiring is in contact with about 85% of the hose surface, compared to the average 35% of other hoses such as the typical ribbon wire heated hose. And while built to take pretty much anything you can dish out at the job site, SPF Depot can provide additional protection with a rubberized jacket to give you even more scuff protection and moisture resistance. Scuff Jacket - Order 246077. 50' lengths.



Scuff Jacket NOT Included

Our Price: $1,485.00
Sale Price: $1,420.75
You Save $64.25!
Heated Hose. 3500psi, 1/4 x 50' with Thermocouple Wire

Sold in JAPAN ONLY. Buy 3/8" for the US market.

Our Price: $1,903.00
Sale Price: $1,807.85
You Save $95.15!
3/8" x 50' 3500psi Heated Hose Set for spray foam and polyurea applications Heated Hose. 3500psi, 3/8" x 50' with RTD

Replacement for the Graco Reactor 2 - E20i, E30i, XP1i..... 4 wire temperature sensor.

Our Price: $2,630.00
Sale Price: $1,990.00
You Save $640.00!
3500 psi heated spf hose thermocouple wire Heated Hose. 3500psi, 3/8 x 50' with Thermocouple Wire

Heated Hose 3500psi 3/8 x 50' Thermocouple Wire

Maintain the correct temperature of plural spray foam components with PMC-USA/Polymac spray foam heated hose. Ideal for high-pressure and large jobs, this 3500 psi x 50’ heated SPF hose is a top seller with our spray foam insulation, roofing and spray-on truck liner customers. A quality high- pressure heated hose not only feeds the spray gun but also results in better foam and polyurea application. This heated hose with thermocouple wire is compatible with PMC-USA/Polymac spray guns. Scuff Jacket NOT Included.

Our Price: $2,115.00
Sale Price: $2,009.25
You Save $105.75!
PMC 2000 PSI Heated Hose Set for Spray Foam & Polyurea Applications 1/2" x 50' Heated Hose. 2000psi, 1/2" x 50' with Thermocouple Wire.

PMC 2000 PSI Heated Hose Set

For a low pressure heated hose to run your foam spray gun, take a look at this 50' X 1/2", 2000 psi heated SPF hose. This spray foam heated hose is as tough as they come compared to anything else out there, plus we offer an upgrade by way of a rubber jacket to help scuff- and moisture-proof your hose.

This heated hose with thermocouple wire employs the use of a braided copper wire wrap for heating. The wiring is in contact with about 85% of the hose surface, compared to the average 35% of other hoses such as the typical ribbon wire heated hose. And while built to take pretty much anything you can dish out at the job site, SPF Depot can provide additional protection with a rubberized jacket to give you even more scuff protection and moisture resistance. Scuff Jacket - Order 246077. 50' lengths.



Scuff Jacket NOT Included

Our Price: $2,060.00
Sale Price: $2,060.00